Frequently asked questions
The questions customers ask us most often about ordering Serge sunscreen fabric — answered with the same figures we quote on orders.
What is the minimum order quantity?
The minimum order is 1,000 m² per colour. That applies to the standard colours and to custom colours alike.
What is the lead time?
20–25 days after the deposit is received. The fabric is woven and coated to order in our Tai'an factory, and orders ship from Qingdao Port.
What are the payment terms?
T/T with a 30% deposit and the 70% balance before shipment. We also accept an L/C at sight.
Can I get free samples?
Yes — A4 swatches of any colour are free. Send us the colour codes, your name, company and delivery address by email or WhatsApp, and we will post the swatches out. The samples page explains the steps.
Can the width be customised?
Yes. Any width between 1600 mm (1.6 m) and 3200 mm (3.2 m) can be made to order, in every colour, so wide zip screens can be made without a seam. The standard widths — 1600 / 1900 / 2500 / 2850 / 3200 mm — are listed for reference on the overview page.
Can the openness be customised?
Yes. Our standard fabric is 3% openness, and openness can be customised across 0–30% to order. Lower openness gives more shading and privacy; higher openness lets through more light and view. Our guide to choosing an openness walks through the trade-off.
Can the colour be customised?
Yes. Alongside the 21 colours on this site — 17 in the 3% twill series and 4 in the plain-weave series — custom colours can be made to order. Tell us the colour you need and we will match it. See all 21 colours online, and our twill weave vs plain weave guide for how the two weaves differ.
What fire ratings does the fabric have?
The fabric is tested by SGS to French class M1 (NF P92-503, report AJFTS26004774R01_EN) and passes US NFPA 701, Method 2 (report AJFTS26004825R01_EN). Standards not listed on the test reports page have not been tested yet — ask us before specifying them. Our article on what M1 and NFPA 701 mean explains both tests.
What is your REACH position?
We publish an SVHC declaration under REACH Article 33 rather than a general compliance claim: this product contains decabromodiphenyl ethane (DBDPE, CAS 84852-53-9) at 0.198% w/w, above the 0.1% w/w threshold. In SGS screening report TAOEC26004647101 (11 May 2026), 253 SVHC were screened and all others were not detected. The full SVHC declaration is available on request.
How is the fabric cut and welded?
Cutting is by crush cutting or ultrasonic cutting. For joining, the fabric can be thermal welded, HF (high-frequency) welded, ultrasonically welded, or sewn — the methods zip-screen and blind fabricators already use. The care guide download summarises the processing guidance.
How do I clean the fabric?
Clean with lukewarm soapy water and a soft cloth or sponge, rinse with clean water, and let the fabric dry fully before rolling it up.
What roll lengths are available?
Roll length is set by the width: 1600 mm width is 50 m per roll, 2850 mm width is 40 m per roll, and 3200 mm width is 33 m per roll. Roll lengths can also be customised — custom lengths are available on request, to suit your production.
Where do orders ship from?
Orders ship from Qingdao Port, in export packing in paper tubes. The factory is in Tai'an, Shandong, and a recent shipment went to a client in the Netherlands.