Fire ratings explained: what French M1 and US NFPA 701 actually mean
Specifications for shading fabric often ask for a fire rating — and the two names that come up most are M1 and NFPA 701. They are not the same test, and a fabric can hold both. Ours does.
M1: the French classification
M1 is a class in the French reaction-to-fire system, classified under NF P92-507. The test behind it, NF P92-503, exposes the material to an electric burner and measures how it responds: how long flames persist after the burner is removed (afterflame), whether it glows, whether it produces burning droplets or debris, and how much of the specimen is destroyed. The classes run from M0 (non-combustible) down to M4; M1 is the highest class a combustible material can reach — it may be combustible, but it does not sustain flaming.
Our fabric was tested by SGS (report AJFTS26004774R01_EN, 30 June 2026) and classified M1: afterflame 0 seconds, afterglow 0 seconds, no droplets or debris, and an average destruction length of 107.5 mm.
NFPA 701: the US test
NFPA 701 is the US standard for the flame propagation of textiles and films — the test most often required for draperies and shading fabrics in American public buildings. In Method 2, used for flat specimens, samples are exposed to a flame and assessed on char length, afterflame time and whether anything burns on the floor beneath.
Our fabric was tested by SGS to NFPA 701:2023, Method 2 (report AJFTS26004825R01_EN, 2 July 2026) and passed: char length 92–97 mm against a limit of 435 mm, afterflame 0 seconds against a limit of 2 seconds, and no molten droplets or debris.
Why both?
The two systems grew up in different countries with different test rigs, so neither result converts into the other — a European project will ask for M1, a US project for NFPA 701, and exporters simply need both on file. One caution that applies to any fabric, ours included: a rating belongs to the construction that was tested. Standards not listed on our test reports page have not been tested yet, so ask us before specifying them. The full figures behind both ratings are on the technical data page.